Honda CRF 250R 2010-2017 Flywheel Weight (524)

NEW DESIGN, EASIER TO INSTALL Kit includes weight ring, installation tool, and detailed instructions. The installation can be done by someone with average mechanical abilities, or you can send us your stock flywheel and we will install it at no extra charge (shipping not included). If you have questions call us at 541-535-4896.

Installation Procedure Summary: You must remove the rotor (stock flywheel) from the engine using the proper flywheel puller. The weight ring is permanently attached to the rotor by means of an interference (press) fit. A special tool is included which will help you press the weight ring onto the rotor without the use of a hydraulic press. You also have to modify the ignition cover by cutting or grinding a small aluminum rib out of the inside. Additional items you will need to have: Common mechanics hand tools, flywheel puller (Steahly part number E-73 or similar), a metal hammer, a torque wrench, feeler gauge set ,a flat metal file, a hand held power grinder or a hacksaw blade, and some metal cleaner such as contact cleaner.

Four ways to add weight to your flywheel:

1. DIY install using our kit
2. Send us your stock flywheel and we will install the weight for free, additional shipping charges apply
3. Purchase the weight already installed on a used OEM flywheel direct from us then return the flywheel off of your bike in good condition for a core refund of $100.
4. Purchase the weight already installed on a used OEM flywheel and keep both the weighted flywheel and the stock flywheel.

Fitment

Honda CRF 250R 2010-2017